Network Cube Camera
·
Quick Start Guide
17
finished. If there is dust or grease on the dome cover, clean the
dome cover with clean soft cloth and isopropyl alcohol.
●
Make sure that there is no reflective surface too close to the
camera lens. The IR light from the camera may reflect back into
the lens causing reflection.
●
The foam ring around the lens must be seated flush against the
inner surface of the bubble to isolate the lens from the IR LEDS.
Fasten the dome cover to camera body so that the foam ring and
the dome cover are attached seamlessly.
Memory Card Installation
This series of camera supports memory card installation. Follow the
steps below to install the memory card.
Insert the memory card into the card slot on the side of the
camera.
(Optional) Push the inserted memory card to get it sprung out.
Memory Card
Install Memory Card
