Network Video Recorder Quick Start Guide
10
Chapter 2 Installation and Connections
2.1 Installation
During installation of the NVR:
●
Use brackets for rack mounting.
●
Ensure ample room for audio and video cables.
●
When routing cables, ensure that the bend radius of the cables are no less than five times than
its diameter.
●
Connect the alarm cable.
●
Allow at least 2cm (≈0.75-inch) of space between racks mounted devices.
●
Ensure the NVR is grounded.
●
Environmental temperature should be within the range of -10° C to +55° C (+14° F to +131° F).
●
Environmental humidity should be within the range of 10% to 90%.
2.2 Hard Disk Installation
Before you start:
Disconnect the power from the NVR before installing a hard disk drive (HDD). A factory
recommended HDD should be used for this installation.
Tools Required: Screwdriver.
2.2.1 DS-96000NI-I16(/H) Series
Purpose:
The following section introduces the HDD installation for the DS-96000NI-I16(/H) series NVR.
Step 1
Fasten the hard disk mounting handle to the hard disk with screws.
Figure 2-1
Fasten Hard Disk
Step 2
Insert the key and turn in clockwise direction to open the panel lock.
