Network Video Recorder Quick Start Guide
20
3.6 Network Settings
Purpose
Network settings must be properly configured before you operate device over network.
Step 1
Go to System > Network > TCP/IP.
Figure 3-5
Network Settings
Step 2
Select the General tab.
Step 3
In the General Settings interface, you can configure the following settings: NIC Type, IPv4
Address, IPv4 Gateway, MTU and DNS Server.
Step 4
If the DHCP server is available, you can check the checkbox of DHCP to automatically obtain
an IP address and other network settings from that server.
Step 5
After having configured the general settings, click the Apply button to save the settings.
3.7 Add IP Cameras
Purpose
Before you can get live video or record the video files, you should add the network cameras to the
connection list of the device.
Before you start
Ensure the network connection is valid and correct, and the IP camera to add has already been
activated.
