ERNITEC DS-2CD6924G0-IHS, Quick Start Manual

Page: 7 / 28

Installation
This equipment is intended for installation in a restricted access
location, access can only be gained by service persons or by users
who have been instructed about the reasons for the restrictions
applied to the location and about any precautions that shall be
taken. Make sure the device is firmly secured to any wall or ceiling
mountings.
Be sure that there is enough space to install the camera and
accessories.
Make sure that the device in the package is in good condition and
all the assembly parts are included.
Make sure that the wall is strong enough to withstand at least 4
times the weight of the camera and the mount.
Make sure that the power has been disconnected before you wire,
install, or disassemble the device.
Make sure that no reflective surface is too close to the camera lens.
The IR light from the camera may reflect back into the lens causing
reflection.
Symbols and Marks
Notice
Warning
Forbidden
Correct
Incorrect