Use and maintenance manual
Skiving machine
Model: SKR-350
____________________________________________________________________________________________________________________
P a g . 9
The entire roller surface should be cleaned with alcohol or a similar product in order to
guarantee good adherence of the new belt and a uniform level without any thickening.
Cutting the abrasive tape.
When changing the abrasive belt, the machine must be disconnected from the main electricity
supply in order to guarantee a safe working environment. Once this has been done, the motor
head should be fully opened roller cover protection.
Cutting the abrasive tape
Levelling the table with respect to the abrasion roller:
This operation will only be necessary in a situation of maladjustment due to possible knocks or
vibrations during transport.
Levelling the table requires the loosening of the height stops:
