Use and maintenance manual
Round belt welder
Model: PRC-15
____________________________________________________________________________________________________________________
P a g . 4
-
Description:
Welding equipment for heat-weldable round belts with a heating plate that is automatically
interposed between the two ends of the belt at a certain temperature and time, and
automatically withdraws, closing the joint and cooling.
-
Technical characteristics:
Dimensions
470x400x330mm.(LxWxH)
Weight 14 Kg
Minimum development 260mm.
Max. Diameter 15mm.
Voltage
1x 230 v 50/60Hz
Power
270 W
Work pressure
5/6 Kg/cm²
Max. temperature
520º C
-
Installation and connection:
Connect the power cable that comes out of the machine to 230V. Then we must provide
compressed air, through the air tube at a minimum pressure of 5Kg/cm
2
.
Place the machine on a table or workbench at a comfortable height for the operator, making sure
that the device is stable and secure.
Leave the electric pedal on the ground and adjust it to a comfortable position without getting in
the way or causing a trip.
-
Using instructions
:
WARNING:
THIS DEVICE INVOLVES THE DANGER OF FINGER ENTRY BETWEEN THE CORD HOLDING
CLIPS, THEREFORE THE OPERATOR MUST BE EXTREMELY CAUTIOUS IN THAT AREA.
Once the machine is connected to the network and provided with compressed air, we will start
the device through the protection switch located on the back.
