GB-13
D
GB
F
NL
I
E
Check the burner head (nozzle and baffle plate)
and the electrodes for dirt and if necessary, clean
using a cloth. Remove stubborn dirt on the elec-
trode rod using fine abrasive paper.
Check electrodes and porcelain insulators
for
cracks and replace the electrodes in case of
damage.
▷
Replace the electrodes if necessary.
74 mm
Z
I
3 mm
Z
I
15
14
16
17
▷
Ensure correct positioning of the electrodes.
74 mm
Z
I
3 mm
Z
I
15
14
16
17
▷
When replacing the ionization electrode, the por-
celain insulator must be flush with the ignition
electrode insulator.
▷
Clean the grille and fan using a cloth only.
19
18
▷
Clean the vane and plates for the air intake using
a cloth only.
21
20
Clean the interior of the device carefully using air.
▷
The vane must not be bent.
Check that the vane switch is functional.
▷
If the vane is moved a little in the direction of the
arrow, a quiet click can be heard. This means
that the switching path is correct.
klick
Assembly
Z
I
24
25
26
31
28
29
30
27
▷
Connector with conical sealing surfaces must
be screwed tight. Otherwise, gas can escape.
Z
I
24
25
26
31
28
29
30
27
▷
Ensure that the rubber seals between the elec-
trodes and the electrode plugs are fitted correctly.
Z
I
24
25
26
31
28
29
30
27
Check the safety functions before commission-
ing.
