ERM Neoverse N1 Page 111 Technical Reference Manual Download

Page: 111 / 241

The following table shows the SSC_AUXDBGCFG Register bit assignments.

Table 4-17 SSC_AUXDBGCFG Register bit assignments

Bits

Name

Type

Function

[31:2]

Reserved.

[1:0]

INTERNAL_DEBUG_OVERRIDE

0b00

: Enable Non-secure self-hosted debug.

DBGEN

and

NIDEN

inputs to the application

processors are HIGH.

0b01

: Disable Invasive, Non-secure self-

hosted debug.

Enable Non-invasive, Non-secure self-hosted
debug.

DBGEN

inputs to the application processors

are LOW and

NIDEN

inputs to the

application processors are HIGH.

0b1

: Disable Non-secure self-hosted debug.

DBGEN

and

NIDEN

inputs to the application

processors are LOW.

Reset value

0b00

Note

Arm strongly recommends that this register is not used, and that you leave both bits at their reset value.

4.4.6

SSC_GPRETN Register

The SSC_GPRETN Register characteristics are:

Purpose

The SSC_GPRETN register is a secure access read/write memory mapped register that provides
16 bit general storage for security purposes. The register resets only on system powerup reset.

Usage constraints

There are no usage constraints.

Configurations

Available in all N1 board configurations.

Memory offset and full register reset value

See

4.4.1 System Security Control registers summary

on page 4-105

The following table shows the SSC_GPRETN Register bit assignments.

Table 4-18 SSC_GPRETN Register bit assignments

Bits

Name

Type

Function

[31:16] -

Reserved.

[15:0]

GPRETN

General-purpose register for Secure state
storage.

Reset value

0x0000

4 Programmers model

4.4 System Security Control registers

101489_0000_02_en

reserved.

4-111

Non-Confidential - Beta

Summary of Contents for Neoverse N1

















































































































































































































































Search results

Summary of Contents for Neoverse N1

Reviews:

Related manuals for Neoverse N1

Brands by name

Popular brands

ERM Neoverse N1, Technical Reference Manual

Search results

Summary of Contents for Neoverse N1

Reviews:

Related manuals for Neoverse N1

Brands by name

Popular brands