6
7
03.1
User Interface
01
Display & LEDs
The display shows the current tempo in beats per minute.
The upper LED M shows the operating mode.
When lit, the 'Live' mode is active, otherwise the midiclock is in its
'Normal' mode. During playback the lower LED flashes with
the beat. It is constantly lit when paused and turns off if all devices are
reset at the next beginning of a playback.
02
Rotary encoder
The rotary encoder is used to set the tempo. The respective function
depends on the current operating mode: In the 'Live' mode, tempo
changes are applied immediately. In the 'Normal' mode, the tempo is
only changed if you press down the encoder after your setting. You can
switch between both operating modes by double-clicking the encoder.
LED
rotary encoder
display
02
01
