StarLink
TrackerSF
Installation Manual
ERM Advanced Telematics
page: 3
1.
The StarLink 2G / 4G
This guide provides information about the StarLink 2G / 4G with internal eSafe and CAN,
and describes its recommended installation procedures.
2.
Safety Instructions
Personal safety is of paramount importance. Please follow all safety
instructions when installing ERM products
•
Always disconnect power when performing installation by removing the negative
connection of the vehicle battery. Never work when power is connected.
•
Always connect the positive wire using a 3A fuse.
•
Reconnect the battery only after the installation is fully completed, making sure all
wires are safely insulated.
•
Use appropriate work tools.
•
Maintain good ventilation and lighting in the work area.
•
Never leave bared wires. Trim all wires not in use in such a way that no bare
conductors remain, and fix them securely in place.
•
Perform installation in a dry environment.
ERM devices are not water-tight.
•
Install ERM devices away from any heat sources.
•
Do not install ERM devices in the engine compartment or on the vehicle’s exterior.
•
Install ERM devices away from large metallic bodies and never install them in small
gaps between metallic objects.
