3. Unpacking and Connecting the TESLA 4000-SV Recorder
The following items are included in the TESLA 4000-SV shipping box:
•
USB cable
•
Letter of Compliance to ISO 9001:2015 standard
•
Letter of Compliance to CE requirements (if requested)
There are no power switches on the recorder. When the power supply is connected, the recorder
starts its initialization process.
a. Connect Ground at terminal 408, shown as #11 in Figure 2 and Figure 3
b. Connect the power supply to terminals 406
– 407, shown as #10 in Figure 2 and Figure 3.
The wire used for the power supply wiring shall be at least 18 AWG (1.02 mm2), 600 V.
c. There are no analog terminals for TESLA 4000-SV
1. Status LEDs
2. Port 401: Ethernet
3. Port 450: USB
Figure 1
– TESLA 4000-SV Front Panel
Sampled value subscriptions must be configured via the ERL 61850 IED Configurator tool for the
TESLA to acquire to analog input data from merging units
. Refer to “Sampled Value Setup
Requirements” in chapter 18-11 of the user manual.
2
3
1
