Figure 2
– T-PRO 4000 Front View (4U)
Figure 3
– T-PRO 4000 Relay Rear View (3U)
Page 1: ...1 Downloading the required software and manual a The T PRO 4000 comes loaded with the requested firmware version All required software as well as the release description of the latest firmware version is available on the Software page of our website Contact the Customer Support team for release descriptions of any other firmware version b Download the following software on your computer Relay Cont...
Page 2: ...power switches on the relay When the power supply is connected the relay starts its initialization process 1 Connect power supply to 17 16 as shown in Figure 3 4 The wire used for the power supply wiring shall be at least 18 AWG 1 02 mm2 600 V 2 Ground the T PRO at 18 as shown in Figure 3 4 4 T PRO 4000 relay front and rear panel layout Figure 1 T PRO 4000 Front View 3U The relay is calibrated bef...
Page 3: ...Figure 2 T PRO 4000 Front View 4U Figure 3 T PRO 4000 Relay Rear View 3U ...
Page 4: ...on Notes page also contains a range of other valuable T PRO instructions and descriptions of specific applications For further information and contact Customer Support at support erlphase com 1 204 477 0591 ext 1 The specifications and product information contained in this document are subject to change without notice In case of inconsistencies between documents the version at www erlphase com wil...
