ERL L-PRO 4000, User Manual

Page: 117 / 406

D02706R02.30 L-PRO 4000 User Manual 6-1
6 Offliner Settings Software
6.1 Introduction
This section deals with the Offliner Settings software. The Offliner settings
software is used to create relay settings on a personal computer. Offliner pro-
vides an easy way to view and manipulate settings. Offliner supports all firm-
ware versions and has the capability to convert older setting versions into new-
er ones.
In this section, first, the Offliner features are presented. The menu and toolbar
are discussed and this is followed by a description of the Graphing and Protec-
tion functions.
Next, the Offliner features for handling backward compatibility with previous
software versions is described. Also described are methods of converting a Set-
tings File, sending a new Settings File to the relay and creating a Settings File
from an older version of the software.
Next, the RecordBase View and RecordGraph to analyze the records from a re-
lay are described.
This is followed by a lengthy description of the main branches from the Tree
View. This section provides all information for Identification, System Param-
eters, SCADA Communication, DNP Configuration, SCADA Settings sum-
mary, Record Length, Setting Groups, ProLogic, Group Logic, Output Matrix
and Settings summary.
Finally, a description of how the settings on the relay can be viewed through
the RecordBase View analysis software is provided.
Figure 6.1: Opening Screen
Setting Tree Setting Area