Eriez Metalarm HH-10 Installation, Operation And Maintenance Instructions Download Page 2

Page: 2 / 4

Introduction

This manual details the proper steps for installing the Eriez
Model HH-10 Hand-held Metalarm

™

Metal Detector.

Careful attention to these Installation Requirements will
assure the most efficient and dependable performance of
this equipment.

If there are any questions or comments about the manual,
please call the factory at 814/835-6000 for metal
detector assistance.

CAUTION
Safety labels must be affixed to this product.
Should the safety label(s) be damaged, dislodged
or removed, contact Eriez for replacement.

Summary of Contents for Metalarm HH-10

Page 1: ...on Operation and Maintenance Instructions ERIEZ MAGNETICS HEADQUARTERS 2200 ASBURY ROAD ERIE PA 16506 1440 U S A WORLD AUTHORITY IN ADVANCED TECHNOLOGY FOR MAGNETIC VIBRATORY and INSPECTION APPLICATIO...

Page 2: ...assure the most efficient and dependable performance of this equipment If there are any questions or comments about the manual please call the factory at 814 835 6000 for metal detector assistance CA...

Page 3: ...you want to leave the detector plugged in but turned off the power outlet itself must be switched General Operation The detector will beep and the green ON LED will illuminate when power is supplied...

Page 4: ...ignal is received by the detector it may lock up for a short period of time That is the alarm signal may not switch off immediately when the detector is moved away from the metal This is normal behavi...