manualshive.com logo in svg

Ericsson W3x Series, User Manual

Share
Download
Ericsson W3x Series User Manual Download Page 21

Configuration and Management 
 

1/1551-CRH 102 168 Uen Rev A  2008-12-16

 15

 

3.1.1 

Enter PIN Code 

The SIM card contains information about the subscription and is normally 
protected by a PIN (Personal Identification Number) code and a PUK 
(Personal Unblock Key) code. 

Normally, you have to enter a PIN code to activate the SIM card. In some 
cases, however, PIN authentication is not required and it is possible to use 
the SIM card without entering a PIN code. 

The 

Enter PIN code

 page is displayed if a PIN code is required: 

 

Figure 9 - Enter PIN code page 

Enter the PIN code (provided with the SIM card). 

You can also check “Remember my PIN” to have automatic SIM 
authentication in case of a system restart. 

Click the 

 Apply 

 button to save the settings. 

3.1.2 Enter 

Password 

If a PIN code is not needed for SIM authentication, or if automatic SIM 
authentication is enabled, the 

Enter password

 page is displayed: 

Summary of Contents for W3x Series



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands