2BInstalling the Equipment
2
Installing the Equipment
2.1
Introduction
For best performance and reliability follow the instructions for site requirements and
installation in the
Reference Guide
and only use installation accessories
recommended by the manufacturers.
2.2
Operating Voltage
2.2.1 AC
Models
AC
models are fitted with a wide-ranging power supply. It is suitable for supply
voltages of 100-240 Vac -10% +6% at 50/60 Hz nominal.
Caution!
This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply to your business,
consult a qualified electrical engineer or your local power company.
Note:
Refer to the
Reference Guide
for details of the color codes used on the
mains leads.
See
Table 5
for fuse information and also the
Reference Guide
for a full power
supply specification.
2.3
Power Cable and Earthing
Check that the power cable is suitable for the country in which the Receiver is to be
used.
(Power Cable Information: H05VV-F, 0.75mm2, 3G or greater)
EN/LZT 790 0002/1 R1A
2011-02-21
7 (20)
