Ericsson T39 At Command Reference Download Page 73

Page: 73 / 224

AT Commands Phone Terminal Terminated

AT+CIND

Indicator Control

“<“

Left arrow

“>”

Right arrow

“C”/”c”

Clear display (C/CLR)

“D”/”d”

Volume down.

“E”/”e”

Connection end (END)

“F”/”f”

Function (FCN) - option key

“S”/”s”

Connection start (SEND)

“U”/”u”

Volume up

“V”/”v”

Down arrow

“^”

Up arrow

“H”/”h”

Button pushed on the MC link handset

<time>:

Time to strike each key.

<time>

Description

0-255

0-25.5 seconds

<pause>:

Pause between keystrokes.

<pause>

Description

0-255

0-25.5 seconds

Description:

Displays the value of ME indicators.

Read command:

AT+CIND?

Read command
response:

+CIND: <ind>,<ind>, ...
The command displays the current value for the different <descr> given below.

Test command:

AT+CIND=?

Shows if the command is supported.

Test command
response:

+CIND: (<descr>,(list of supported <ind>s),(<descr>,(list of supported <ind>s)),
(<descr>,(list of supported <ind>s)), ...

Parameters:

<ind>:

Integer; in the range given by <descr>. <ind> value ‘0’ means that the indicator is off,
‘1’ means the indicator is on, ‘2’ is more substantial than ‘1’, and so on.

<descr>:

<descr>

Description

“battchg”

Battery charge level (0-5)

“signal”

Signal quality (0-5)

“batterywarning”

Battery warning (0-1)

“chargerconnected”

Charger connected (0-1)

“service”

Service availability (0-1)
(value = ’1’ means there is contact with the net)

“sounder”

Sounder activity (0-1)
(Phone silent status, ‘1’ = phone silent)

“message”

Message received (0-1)

<keys>

Description

Summary of Contents for T39

































































































































































































































Search results

Summary of Contents for T39

Reviews:

Related manuals for T39

Brands by name

Popular brands

Ericsson T39, At Command Reference

Search results

Summary of Contents for T39

Reviews:

Related manuals for T39

Brands by name

Popular brands