Ericsson T18 User Manual Download

Page: 11 / 96

Display Information and Key Functions

Display Information
and Key Functions

Your phone display will help you to:

•

verify that you are dialling correctly

•

check your signal strength and service availability

•

find out if you have received messages

•

check which line is in use if you have the Alternate Line Service (ALS)

•

check battery level

Icons in the Display

Icons are displayed when specific functions are active or if you have received

a message. The figure in the margin shows an overview of all the possible

icons and where they appear.

The table below shows every icon separately and also gives you an explana-

tion.

DISPLAY INFORMATION

Icon/Indicator:

Name:

Description:

Signal strength
meter

The strength of the received signal is
indicated in steps. Six steps indicate
the strongest signal.

Battery meter

Indicates the current state of the bat-
tery. The fuller the icon, the more
power there is.

Keypad lock
indicator

The keypad is locked.

Divert indicator

An arrow means that the

Divert all

function is active.

Silent ring signal

A crossed note means that no sound
can be heard when you receive a call.

SMS indicator

The envelope icon means that you
have received a text message (SMS).

Voice mail indicator The tape loops mean that you have

received a voice message. Will not
appear on all networks.

Summary of Contents for T18

































































































Search results

Summary of Contents for T18

Reviews:

Related manuals for T18

Brands by name

Popular brands

Ericsson T18, User Manual

Search results

Summary of Contents for T18

Reviews:

Related manuals for T18

Brands by name

Popular brands