channel. One of the following messages
may be momentarily displayed:
"SCAN DIS" -
–
The radio is not programmed
to scan.
"FIXED P1" -
–
A priority-one channel has
been programmed into the
radio. A new priority-one
channel can not be selected.
"FIXD LST" -
–
A fixed scan list is pro-
grammed into the radio. It is
not possible to change the list
without reprogramming the
radio.
4.
To add or delete additional channels, repeat
steps 2 through 4.
5.
Press the EXIT button to return to normal
operation.
Using Scan
Toggle scan on or off by pressing SCAN. The
"SCN" status flag turns on when the radio is scan-
ning.
TELEPHONE INTERCONNECT CALLS
SCAN Model
Telephone interconnect calls can be placed on
radio channels equipped with this capability. Each
channel programmed into the radio can be pro-
grammed for telephone interconnect by enabling it for
DTMF dial operation. One (1) of the ten (10) pro-
grammed telephone numbers can be selected and
automatically dialled.
Communication takes place in a simplex mode.
In other words, the PTT BUTTON must be pressed
each time you wish to transmit and it must be re-
leased to receive.
Placing A Call
Ten (10) telephone numbers can be programmed
in the radio for automatic dial operation. Typically,
telephone numbers programmed into the radio by the
maintenance personnel each have a specific name
(8 characters maximum) assign. For example: "OF-
FICE" or "HOME". To recall a number and complete
a call, proceed as follows:
20
Summary of Contents for M-PA LBI-38377E
