Ericsson LBI-38901B, Installation Manual

Page: 7 / 36

30
Figure 27 - Remote Mounting Bracket Installation
Cassette Mounting (EURO ONLY)
The cassette mounting assembly is designed to mount in a standard DIN
space in the instrument panel or console. This mounting permits rapid
insertion and removal of the radio unit from the vehicle. All
connections are made through a quick disconnect connector at the rear
of the cassette mounting assembly to the radio unit. This connector is
part of the cassette assembly. The cassette assembly is shown in Figure
28.
Figure 28 - Cassette Assembly
Top Mount
Bottom Mount
7
Figure 4 - Typical Installation (Remote Mount Shown)
It is suggested that the radio be installed by one of the many authorized
General Electric Service Stations located throughout the United States.
These experienced service stations can provide a proper radio
installation and make any final adjustments that may be needed.
WARNING
•
Vehicular Electronics-Electronic fuel injection systems, electronic
anti-skid braking systems, electronic cruise control systems, etc.,
are typical of the types of electronic devices which may be prone
to malfunction due to the lack of protection from radio frequency
energy present when a radio is transmitting. If the vehicle
contains such equipment, consult the dealer to determine if such
electronic equipment will perform normally when the radio is
transmitting.
•
For passenger safety, mount the radio securely so that the unit
will not break loose in the event of a collision. This is especially
important in station wagons, vans and similar type installations
where a loose radio could be extremely dangerous to the vehicle
occupants.