Ericsson iPECS-100 Feature Description And Operation Manual Download Page 349

Page: 349 / 464

iPECS-LIK

Feature Description & Operation Manual

Issue 6.1

310

5.3 AUTO RELEASE OF [SPEAKER]

Description

After completion of certain features, the

[SPEAKER]

button turns off automatically, returning

the iPECS Phone to idle.

Operation

System

Auto Release of

[SPEAKER]

button operation is automatic for supported features, see

conditions below.

Conditions

1. This feature applies to all User and Attendant Programming except Custom

Message, CO/IP line Disable and Version Display. Auto Release of

[SPEAKER]

button also applies to features including Call Park, Call Back, Call Forward and
CO/IP Queuing.

2. If, during Station User Programming, erroneous data is entered, error tone is

received and the user must correct the error before the station will return to idle
automatically.

Programming

Related Features

Hardware



PECS Phone

Summary of Contents for iPECS-100

















































































































































































































































































































































































































































































Search results

Summary of Contents for iPECS-100

Reviews:

Related manuals for iPECS-100

Brands by name

Popular brands

Ericsson iPECS-100, Feature Description And Operation Manual

Search results

Summary of Contents for iPECS-100

Reviews:

Related manuals for iPECS-100

Brands by name

Popular brands