How to Lock the SIM Card
1. Select Lock card from the
ACCESS
menu.
2. Press YES.
3. Enter your PIN code and press YES.
The message Locked confirms that the card lock is now activated.
The Phone Lock
The phone lock protects the phone against unauthorised use in the
event of theft. It is not activated when you purchase the phone. You
should, however, activate the phone lock as soon as possible and
also change the factory-programmed security code of 0000 to any 3-
to 8-digit personalised code.
Note!
If you forget your security code, you need to contact your
dealer to unlock your phone. For security reasons, this may take
some time.
There are two different types of phone locks – Full lock and
Autolock.
Full Lock
If the Full Lock is activated, the message Phone locked is
displayed briefly, each time the phone is turned on. The message is
followed by the prompt Enter lock code. The user then has to
enter a security code and press
YES
to be able to use the phone.
Autolock
If the Autolock is activated, the message Phone locked and the
prompt Enter lock code will not appear until a new SIM card is
inserted into the phone. After the security code has been entered
correctly, the phone can be used with the new SIM card. The user
will not be asked to enter the security code until the original SIM
card or a different SIM card is inserted.
How to Change the Security Code
1. Select Phone lock from the
ACCESS
menu and follow the same
procedure as when changing the PIN code.
How to Lock/Unlock the Phone
1. Select Phone lock from the
ACCESS
menu.
The current setting Full lock, Autolock or Unlocked is shown
between brackets.
2. Select the required setting.
3. Enter the security code and press YES. PHONE LOCK is
displayed together with the new setting.
24
EN/LZT 126 1353 R1B