45/70
15
ANNEX: PC DATA CONFIGURATIONS
15.1
WINDOWS 98 GPRS SET-UP
Warning!: your PC must have the Dial-up Networking and
the TCP/IP protocol installed within the network
components. You can check this in ‘Start->Settings-
>Control Panel’ and double clicking on ‘Network’. If not,
these components have to be previously added from your
Windows installation disk.
To configure your GPRS connection under Windows 98 in
your PC, follow steps 1 to 9:
1)
Go to ‘My Computer’ and double-click ‘Dial-Up
Networking’.
2)
Double-click on ‘Make New Connection’ so that the
wizard starts. Type a name for the connection and select
the installed analog modem from your computer, then click
on ‘Next’.
3)
In the ‘Telephone number:’ field enter:
*98#
, then click
‘Next’.