manualshive.com logo in svg

Ericsson EDACS Jessica, Operator'S Manual

Share
Download
Ericsson EDACS Jessica Operator'S Manual Download Page 8

LBI-39001

8

Task

Accomplishing Task with Jessica

DTMF overdial

Consult  your  radio operator's manual for

specific usage.  DTMF is allowed in clear
voice only.  Note:  Currently, EDACS
radios generate the North American
DTMF tones.  Therefore, to use overdial
outside North America, EDACS radios
would be required to generate the
appropriate tone set.   

Terminating a call

A radio-originated or PSTN- or PBX-

originated call may  be terminated for a
radio with a keypad by pressing the SPC
or Clear button.  Radios without a keypad
may terminate the call by not keying the
radio within the hang time period.

3.2.  PHONE USERS

The  following  chart  shows how to access Jessica features from a

telephone.

Task

Accomplishing Task with Jessica

Placing a phone-
originated call

1. The PSTN user must dial into the

MD110 via a customer-defined public
number.  Once the MD110 answers, it
generates a second dial tone.

Note:  Normally, a user will skip to

step 4, but steps 2 and  3 may  be used
to obtain more phone privileges where
allowed.

LBI-39001

5

l

l

Ending a Call

Press the clear button on your radio.  Please consult your operator's
manual for details.

l

l

Common Speed Dialing

Consult  your System Administrator for the  common speed dial
numbers.  Follow the steps for "Placing a Call" and use the common
speed dial number.

2.2.  CALLING EDACS RADIOS FROM A PHONE

For all types of calls to an EDACS radio, phone users hear normal

phone tones i.e., ringing until the called party answers or the call times
out, or alternatively, a busy tone until hanging up or the call times out.

l

l

Placing a Call

When calling a radio that has a direct inward dial (DID) number,
call the PSTN number for that group or individual.

For all other radios, follow one of the sequences below.  With some
systems,  the  phone user may  need to enter an EDACS selector
number (not shown here).  Valid logical identification (LID)
numbers range from 00001 to 16382, and valid group identification
(GID) numbers range from 0000 to 2047.  A leading "3" designates
a digital call and a "2" before a GID number designates a group
call.  The term "digital" refers to voice transmission in a digital
format.

First, call the EDACS telephone number.

At the tone, enter the EDACS selector, if necessary.

Summary of Contents for EDACS Jessica













Reviews:

No comments

Brands by name

Popular brands

Load more brands