background image

Other Useful Facilities

45

Dialog
3212

Dialog 
3210

Dialog
3211

NIGHT SERVICE

When the exchange is in night service mode, all your inco-
ming calls to the operator are transferred to a selected exten-
sion or group of extensions. The exchange is equipped with
four different night service modes:

Common night service

All incoming calls to the operator are transferred to one spe-
cific extension. Answer the call in the normal way.

Individual night service

Selected external calls to the operator are transferred to one
specific extension. Answer the call in the normal way.

Universal night service

All incoming calls to the operator are transferred to a univer-
sal signalling device, e.g. the common bell. Answer the call
as descibed in section ”Common bell group”.

Flexible night service

This function permits you to order an external line and 

connect it directly to your telephone. Ask your operator for
the external line numbers.

To order flexible night service

Press and dial the digit or digits to get a line

Press and dial external line number

Press

Cancel

Press and dial your own extension number

Press

Summary of Contents for Dialog 3210

















































































Reviews: