5.
When the channel has been acquired,
the "TX" and "BSY" status flags are dis-
played and the channel access alert
tone (one beep) is heard.
6.
Hold the radio approximately three
inches from your mouth and speak into
the microphone in a normal voice.
7.
Release the PTT BUTTON when the
transmission is complete. If the trans-
mission exceeds the programmed Car-
rier Control Timer limit, the radio will
unkey and an alert tone will sound.
8.
Listen for a reply.
If a group is not programmed for pri-
vate mode operation, "PVT DIS" will
momentarily show in the display if
an attempt is made to enable private
transmit mode. It is not possible to
operate on this group in private mode
If the radio is programmed for forced
private operation, "FRCD PVT" will
momentarily show in the display if
an attempt is made to disable private
transmit mode. It is not possible to
transmit on this group in clear mode.
If a group programmed for private op-
eration has been selected and there is
no key in the radio for the selected
group, "NO KEY x" (where "x" is the
key number) will periodically flash in
the display. If a transmission is at-
tempted, "NO KEY x" will show in the
display and the radio will emit a series
of beeps and will not transmit.
NOTES
22