HANDSET TEST
HANDSET
To test the handset by itself, loop the keypad serial line to
the Display serial line by connecting P1-1 to P1-3 on a test
connector (refer to Figure 2). Apply n12V to P1-5 and
ground P1-2. Attach the connector on the handset cord to the
test connector and turn the power on.
HANDSET SELFTEST
The handset test consists of tests of: RAM, display, back-
light, call timer, keypad, hookswitch and serial communica-
tions.
The test sequence is as follows:
Step
Procedure
Display
1.
Power Up With
SELFTEST
Loopback connected.
2.
After 1.6 seconds RAM
RAM PASS or
test is complete
RAM FAIL
3.
Start display test Step
All segments
through Display
and common 0
After 1.6 seconds
All segments
and common 2
After 1.6 seconds
All segments
and common 3
After 1.6 seconds
All segments
and common 1
After 1.6 seconds
segments 2, 6, 10,
14, 18, 22, 26, 30
and all commons
After 1.6 seconds
segments 0, 4, 8,
12, 16, 20, 24, 28
and all commons
After 1.6 seconds
segments 3, 7, 11,
15, 19, 23, 27, 31
and all commons
After 1.6 seconds
segments 1, 5, 9,
13, 17, 21, 25, 29
and all commons
4.
Backlight Test
BACKLITE
After 1.6 seconds
LITE ON
After 1.6 seconds
LITE OFF
5.
Call Timer Running
000 00 0
Any key, except END,
will stop the CALL
TIMER and go to the
keypad test.
6.
Keypad Test (Audio can be
tested here) Any key can be
pushed in any order:
Push 1
KEY 1
Push 2
KEY 2
.....
....
Push 0
KEY 0
Push END
End key pad test
Push CLR
KEY CLR
Push SND
KEY SND
Push STO
KEY STO
Push FCN
KEY FCN
Push RCL
KEY RCL
Push A-Z
KEY ALP
Push VOL +
KEY VUP
Push VOL -
KEY VDN
On Hook to Off Hook
OFF HOOK
Off Hook to On Hook
ON HOOK
The END key ends the
Keypad test
7.
RAM status (70=pass,
71=fail) is sent on the key
pad serial line
8.
Serial communications test
(Audio can be tested here)
Serial communication is tested
by pushing keys and displaying
as follows:
With entries scrolling across the
display, as many keys as needed
can be pushed (F is key release)
F
KEY: 0
F0F
1
F0F1F
2
F0F1F2F
3
0F1F2F3F
4
1F2F3F4F
5
2F3F4F5F
6
3F4F5F6F
7
4F5F6F7F
8
5F6F7F8F
9
6F7F8F9F
VOL -
7F8F9FAF
VOL +
ROAM Indicator Flash
STORE
8F9FAFCF
SEND
9FAFCF-F
*
AFCF-FHF
#
CF-FHF?F
A-Z
-FHF?F*F
FCN
HF?F*FAF
A
?F*FAFBF
B
*FAFBFCF
C
AFBFCFDF
PTT
BFCFDFEF
PTT Released
CFDFEFGF
On Hook
FDFEFGFH
Off Hook
DFEFGFHI
RCL
FEFGFHI F
END
EFGFHI FF
CLR
FGFHI FFF
9.
To complete the test,
power down and remove
the Loopback.
Figure 2 - Test Connection
LBI-38412
2
