Ericsson 19A149978P1, Maintenance Manual, Page: 3 / 18

SPECIFICATIONS*
OUTPUT VOLTAGE
Transmit and Receive Simultaneously 13.2 Vdc
±
0.6 Vdc @ 29 Amps (F801B)
13.2 Vdc
±
0.6 Vdc @ 4 Amps (J801)
Receive only < 16.0 Vdc @ 3 Amps (J801)
Transmit only
(For 225 watt PA option) 13.2 Vdc
±
0.6 Vdc @ 33 Amps (F801B)
INPUT VOLTAGE 121 Vac
±
20% (60 Hz version)
230 Vac
±
15% (50 Hz version)
INPUT FREQUENCY 60 Hz
±
2 Hz (60 Hz version)
50 Hz
±
2 Hz (50 Hz version)
Note: For every + 1.0% change in the input frequency, the output voltage will not vary more than + 1.6% from the
output voltage measured at the nominal input line frequency.
INPUT LINE SURGE PROTECTION 150 V rated MOV (60 Hz version)
275 V rated MOV (50 Hz version)
DUTY CYCLE
For 0-33 Amp output 100% (Continuous Duty)
OUTPUT VOLTAGE RIPPLE < 100 mV p-p @ 25
°
C
< 200 mV p-p @ -30
°
C
OUTPUT TRANSIENT RESPONSE
Overshoot
Undershoot Not to exceed 18 Volts
Not less than 11 Volts
EFFICIENCY > 70% @ rated TX/RX load current and nominal line volt-
age
FUSE CAPABILITY
Input 10 Amp (60 Hz version)
(2) 5 Amp (50 Hz version)
Output 5 Amp (Low Current Port)
40 Amp (High Current Port)
DIMENSIONS (HxWxD) 5.25" x 19" x 10.35"
WEIGHT 45 lbs.
OPERATING ENVIRONMENT -30
°
C To +60
°
C
*
These specifications are intended primarily for the use of the service personnel. Refer to the appropriate Specification
Sheet for the complete specificationsl
LBI-38550
3