Ericsson GE FMD LBI-38609A, Operator'S Manual

Page: 25 / 32

SPECIAL CALL OPERATION
When in Special Call mode, the keypad is automatically selected for
DTMF keypad operation. To select Primary or Alternate operation, use
the 2nd switch. To dial a number, follow the procedures below:
INDIVIDUAL CALLS:
Use the keypad to enter the ID of the radio to be called (from 1
to 5 digits). Valid ID’s are in the range of 1 to 16,382. Press
PTT to place the individual call. Once pressed, operation is the
same as Placing an Individual Call.
TELEPHONE INTERCONNECT CALLS:
Use the keypad to enter the phone number to be dialed. Press
the "*" key to dial the number. Operation proceeds just like
Placing a Telephone Interconnect Call. Once the call is placed,
the keypad can be used to overdial digits as described under
Conventional Keypad Operation.
LAST NUMBER REDIAL:
To recall the last number dialed (Special Call only), select
Special Call mode. While in Special Call, simply press the
SCAN switch. The display will show the last number entered.
If the number was an individual call, simply press PTT to call the
individual. If the number was a Telephone Interconnect call,
press "*" to dial the number (note: DTMF overdial numbers are
not stored in the Last Number Redial buffer).
MOBILE DATA
Your FMD radio is equipped to interface with a Mobile Data Termi-
nal/Computer Host. When placing or receiving data calls, the FMD
display will show "DATACALL". When "DATACALL" is present, voice
calls are disabled. You will miss all voice calls made to the radio when
data is being exchanged. You can stop transmission and reception of
data by one of the following:
1. Remove the microphone from the hookswitch.
2. Hold the CLR switch down and press PTT. A high pitched beep
will be heard. Release the CLR switch.
25