PER STEP PLAY SETTINGS, AUTOMATIONS AND PARAMETER LOCKS
VCF
DRIVE
3/2
4/3
MOD LVL
MULTIPLY
GROOVE
PLAY MODE
DIVIDE
MODULATION DESTINATION
MODULATION DEPTH
10% 20% 30% 40% 50% 60% 70% 80%
A B C RND FWD BWD PP RND
PROB
RATCHET ODDS1 ODDS2
SYNC
KIT
PATTERN
MOD
VCF
DRIVE
3/2
4/3
MOD LVL
MULTIPLY
GROOVE
PLAY MODE
DIVIDE
MODULATION DESTINATION
MODULATION DEPTH
10% 20% 30% 40% 50% 60% 70% 80%
A B C RND FWD BWD PP RND
PROB
RATCHET ODDS1 ODDS2
SYNC
KIT
PATTERN
MOD
You can program PER STEP RATCHETS (trigger repeats
on the specific steps) on the PĒRKONS HD-01. To do so,
push and hold the relevant step button while pushing
and holding the RATCHET button and then pushing one
of TAP buttons. There are x2, x3, x4 and x5 repeats
available. An example to the left shows 4 repeats
programmed on step 5 of the second voice.
Push and hold a step button and press the RATCHET,
ODDS1, ODDS2 and PROBABILITY buttons to inspect
which of these per-step settings have been applied to
the step.
PER-STEP RATCHETS
You can program the ODDS of playing a step on the
PĒRKONS HD-01, meaning, that with odds 1/2, the relevant
step will be played every second time the sequencer is
activating the step. To do so, push and hold the relevant
step button while pushing and holding the ODDS1 (1/2, 1/3,
1/4 and 1/8) or ODDS2 (2/3, 3/4, 4/5, 7/8) button and then
pushing one of TAP buttons.
An example to the left shows ODDS of 3/4, programmed
on step 9 of the third voice. Push and hold a step button
and press the RATCHET, ODDS1, ODDS2 and PROBABILITY
buttons to inspect which of these per-step settings have
been applied to the step.
Take note that only one ODDS or PROBABILITY setting can
be set per-step at a time!
PER STEP ODDS
To “animate” your performance and give it a more “human” feel, per-step automations are available.
Summary of Contents for PERKONS HD-01
Page 1: ...U S E R M A N U A L...
Page 29: ...TO BE CONTINUED...