3 of 4
300-5472-00 rev. B • 06/16
Self-threading Screw
325-5464-00
2” Button-head Screw
325-5034-00
Nylock Nuts
325-5186-00
1/2” Flat-head Screw
325-5193-00
S T E P 2
Install the Handle Support
Align the Handle Support with the
Handle Bracket so that the curved side
is on the bottom and the fl at side is on
top.
Feed one 1/2" Button-head Screw
through the Handle Support and the
Handle Bracket and loosely capture
with a Nylock Nut. Repeat for the
remaining three screws and nuts,
then tighten. Use the provided 1/8"
Hex Key and your own 3/8" socket,
nut driver, or wrench to tighten the
fastener.
S T E P 1
Install the Handle Bracket
Select the installation point for the
handle.
Align the handle Bracket with the
holes on the column or Extension
Tube.
Install the Handle Bracket with three
1/2" Self-threading Screws.
S T E P 3
Install the Handle Tube
Align the Handle Tube with the holes
on the support.
Using the 5/32" hex Anthro driver (it
came with your cart), loosely attach
with two 2" button-head screws.
Tighten all the screws on the support,
the bracket, and then on the tube.