3 of 3
300-5416-00 rev. B • 08/19
1/8" Drill Bit
Shelf Profi le
1/2"
Tape
© 2019 Ergotron, Inc. All rights reserved.
www.ergotron.com
|
USA: 1-800-888-8458
S T E P 1
Install the Bracket
Select the installation location. Place the
mounting bracket on the bottom of the shelf at
the desired location so that the side with four
holes is against
the shelf.
Using the Mounting Bracket as a template, mark
the drill points through the two larger bracket
holes onto the bottom of the shelf.
Drill the screw holes using a 1/8” drill bit. Because
the shelf is 3/4” thick, only drill the hole 1/2” deep.
(Mark your drill bit with masking tape to be sure
you don’t drill too far.)
Install the bracket onto the shelf using
two 3/4" MDF wood screws.
S T E P 2
Install the Holder
Slide the Gel Cup/Probe Holder over the
bracket until it clicks into place.
CO N G R AT U L AT I O N S ! YO U R H O L D E R A S S E M B LY I S CO M P L E T E !
For local customer care phone numbers visit: http://contact.ergotron.com
For Service visit: www.ergotron.com
For Warranty visit: www.ergotron.com/warranty
For the latest User Installation Guide please visit: www.ergotron.com
3/4” Button Hd PB Screw
