3 of 4
300-5418-00 rev. R • 10/19
1/4-20 UNC Flat Head Screw
S T E P 2
Connect the Base with the Tube
Holding the column from the center (don't push
from the top) slide the tube into the base so
that the tube goes all the way to the bottom of
the base.
Align the upper hole on the base with a
threaded hole in the column. (For the large
cart, you'll use the top hole; for the small cart,
you'll use the second hole.) Loosely attach the
column to the base with two 1/4-20 UNC Flat
Head Screws.
S T E P 1
Insert the Casters into the Base
Place the base upside down. Use a
rubber mallet to tap the locking casters
into the front receivers of the base.
Tap the non-locking casters into the
receivers of the base.
A S S E M B LY S E Q U E N C E
Plan out the assembly sequence to make your installation easier.
1. Pre-drill the top for accessories (Mouse Holder, Side Bin, Gel Cup/Probe Holder, Extension Tube).
2. Assemble the cart.
3. Base Storage Shelf.
4. Drawer, Keyboard Caddy, Standard Handle.
5. Additional Shelves, Equipment Shelves, Metal Bin.
6. Cable Bin, Glove Box Holder.
7. Mouse Holder, Side Bin, Gel Cup & Probe Holder, Extension Tube.
8. 8" Handle, Flat Panel Mounts.