3 of 4
300-5418-00 rev. R • 10/16
3/4" Flat Hd Screw
325-5466-00
STEP 1A
Connect the Base with the Tube
Holding the column from the center (don't push
from the top) slide the tube into the base so that
the tube goes all the way to the bottom of the
base.
Align the upper hole on the base with a threaded
hole in the column. (For the large cart, you'll
use the top hole; for the small cart, you'll use the
second hole.) Loosely attach the column to the
base with two 3/4" Flat-head Screw.
STEP 1b
Insert the Casters
Place Zido on its side. Add the locking
casters (the ones with the brakes) to the
front of the base assembly. Add the non-
locking casters to the back of the base
assembly.
ASSEMBLY SEQUENCE
Plan out the assembly sequence to make your installation easier.
1. Pre-drill the top for accessories (Mouse Holder, Side Bin, Gel Cup/Probe Holder, Extension Tube).
2. Assemble the cart.
3. Base Storage Shelf.
4. Drawer, Keyboard Caddy, Standard Handle.
5. Additional Shelves, Equipment Shelves, Metal Bin.
6. Cable Bin, Glove Box Holder.
7. Mouse Holder, Side Bin, Gel Cup & Probe Holder, Extension Tube.
8. 8" Handle, Flat Panel Mounts.