![Ergotron StyleView LiFe Power Upgrade System Installation Manual Download Page 2](http://html1.mh-extra.com/html/ergotron/styleview-life-power-upgrade-system/styleview-life-power-upgrade-system_installation-manual_2422622002.webp)
2 of 17
888-83-072-G-01 rev. D • 01/15
ENGLISH
• Power will be lost when battery is removed unless power module is plugged into AC wall power.
• When not using the battery for long periods, battery should be fully charged before storage and charged regularly during
storage.
WARNING: DO NOT charge battery with any other charger.
WARNING: For low voltage recovery, diconnect all power inputs and outputs (cables and battery), wait 30 seconds, then
reconnect all inputs and outputs.
WARNING: Keep battery cool or at room temperature:
• Charging Temperature: 0°C - 40°C (32°F - 113°F)
• Discharge Temperature: -10°C - 40°C (14°F - 104°F)
• Storage Temperature: -50°C - 65°C (-58°F - 149°F)
WARNING: Never attempt to open or service the battery.
WARNING: DO NOT drop, puncture or crush battery or expose to water.
WARNING: DO NOT use battery if physical damage is evident.
Safety
To avoid risk of electric shock, do not expose electrical components to water, cleaning solutions or other potentially corrosive
liquids or substances.
Cables - Keep cables neatly organized on the Cart (a variety of solutions are provided with your cart for this purpose). Excess
cables should be routed away from moving components with cable clips. Review Cable Routing section of this guide, or contact
Ergotron Customer Care for more information.
Customer Equipment- Make sure equipment is balanced and mounted securely to Cart. Do not reposition Cart components
on riser or tower unless instructed to do so in the installation instructions. Moving Cart components too high or too low on the
Riser may create an unstable condition, leading to equipment damage or even personal injury. Contact Ergotron Customer Care for
information about moving Cart components.
WARNING: In rare cases, if the power system and battery protection features fail, the battery may become overcharged and in
some instances it may become extremely hot, possibly melting the plastics and releasing smoke. If a battery begins to smoke or
melt:
• Unplug the cart, or if possible disconnect the battery from the power system immediately.
• Move the cart to a well ventilated area.
• Use a Carbon Dioxide, Dry Chemical or appropriate foam fire extinguisher to spray the hot battery.
If a fire extinguisher is not available, use copious amounts of water, or cover the battery with sand.
If exposed to battery contents seek immediate medical attention and follow the below guidelines.
Exposure to vapor released from the battery is irritating to the eyes, skin, mucous membranes and respiratory tract. This may cause
nausea, dizziness and headache.
In case of direct contact to the battery’s electrolyte:
• Immediately flush eyes with water for at least 15 minutes.
• Thoroughly rinse hands and other affected areas with water.
• Promptly remove and wash any contaminated clothing.
In All Cases, Seek Immediate Medical Attention!
This installation manual is only for installation onto an Ergotron cart. For power
system information, please see provided operations manual.