1:1 Scale Drill Template
300-5235-00 rev. D
• 08/19
Step 1
Your Mouse Shelf
(Swing Out)
may be mounted to just
about any AnthroCart Shelf or Worksurface.
Hold the Shelf in your desired mounting location or use
the supplied drill template
(see below)
.
Mark the four hole positions. Carefully drill all holes
using a
1
/
8
” drill bit (approximately 1/2” deep).
TIP: Place a
small amount of masking tape at
1
/
2
” on your drill bit.
Secure the Mouse Shelf to your Worksurface using the
four
1
/
2
” Wood Screws.
Finally, place the Mouse Rail and Mouse Pad onto the
Mouse Shelf as best suits your personal preference.
Congratulations! Your assembly is complete.
1
/
2
” Wood Screw
325-5008-00
1
/
2
” Wood
Screw
Mouse Rail
Mouse Pad
Assembled Cart
Mouse Swing
Out Shelf
For local customer care phone numbers visit: http://contact.ergotron.com
For Service visit: www.ergotron.com
For Warranty visit: www.ergotron.com/warranty
© 2018 Ergotron, Inc. All rights reserved.
www.ergotron.com
|
USA: 1-800-888-8458
|
Europe: +31 (0)33-45 45 600
|
China: 400-120-3051
|
Japan: [email protected]
For the latest User Installation Guide please visit: www.ergotron.com