888-97-297-G-01 rev.D • 11/16
7 of 7
4
3
M6 x 25mm
2x
1x
ID: 6.5 mm
OD: 12 mm
THK: 1 mm
2x
4 mm
Adjustment · Ajuste · Réglage · Einstellung · Instellen · Regolazione ·
調整
· ·
조절
EN
Important! Adjust your mounting solution to handle the added weight.
You will need to adjust your product after installation is complete. Make sure all your equipment is properly
installed on the product before attempting adjustments. Your mounting solution should move smoothly and
easily through the full range of motion and stay where you set it. If movements are too easy or diffi
cult or if
product does not stay in desired positions, follow the adjustment instructions that came with your mounting
solution to create smooth and easy movements. Depending on your product and the adjustment, it may take
many turns to notice a diff erence. Any time equipment is added or removed from your moutning solution,
resulting in a change in the weight of the mounted load, you should repeat the adjustment steps to ensure safe
and optimum operation.
