Use and Care Manual
ZGR
12/13
OPERATION GUIDES
On pressing the On/Off button, a light will tell you that the chair is in the idle functioning mode
and will commence a massage program when you press any other function button. If during a
massage function program, should you wish to suspend same for any reason, please press the
On/Off button and the program will cease;
1. On/Off button
Press this button to activate the vibration function for the lower back and lumbar areas. The
vibration function operates in a sequence of ‘Strong’ –‘Weak’ – ‘Off’. Press the
button again to change the sequence. With the vibration function in operation, should you wish
to change the angle of the back rest or leg rest, the vibration function will pause and resume
automatically one the back rest or leg rest action is completed;
4. Vibration
Press this button to commence the heating function for the lumbar and seat region. A light will
indicate that the heating function is in operation. Press the button again to cease the function.
With the heating function in operation, should you wish to change the angle of the back rest or
leg rest, the heating function will pause and resume automatically once the back rest or leg rest
action is completed;
3. Heating
On pressing the ZGR button the back rest, the foot rests and the seat are automatically
adjusted to preset reclining angles.
•
The reclining motion can be stopped by pressing either the ZGR button, or the Back Rest
Recline/Restore button or the Leg Rest Raise/Restore button;
•
After achieving the ZGR position, you may still adjust the angles of the backrest (incline
only) and footrest by pressing the relevant button;
2. ZGR button
