FLEXCHARGE4-DSK
DESK CLAMP
Clamp Power Module Assembly to Work Surface
• Position the assembly in the desired location and
clamp securely to the work surface by tightening
the triangle knob.
• Plug the power cord into an AC outlet.
YOU ARE NOW READY
to use the two AC power outlets and two USB charging
ports on the FlexCharge4.
Work Surface
Grommet Mount
The grommet mount method is similar to the edge
mount method, except here the assembly is
clamped to the edge of a 2
¼”
grommet hole rather
than the edge of the work surface.
5