950-112 manual ver A
ergonomic products • 198 Airport Rd • Fall River, MA 02720 • 866-374-6487
PAGE 8
Surgical Table
Model: R3A1
7. Insert screw guide “A” into access hole adjacent to yellow dot (Fig 7.1). Line up points of “A” on dot guide.
Remove one screw from bag. Using the 4mm ball hex shaft driver, attach screw to ball end of tool (Fig 7.2). Place
screw into guide, turn tool clockwise until finger tight (Fig 7.3). Slide guide out with tool (Fig 7.4) repeat operation
on opposite side of leg.
4 – LEG INSTALLATION CONT’D
Fig 7.1
Fig 7.2
Fig 7.3
Fig 7.4
