950-084 C1A1 manual E
ergonomic products • 198 Airport Rd • Fall River, MA 02720 • 866-374-6487
PAGE 6
30” Resupply Cabinet
with Pulldown
Model C1A1
1. Position the bottom of the Resupply Cabinet 54” above the finished floor where indicated on the elevation.
This height is required for proper use of the pull-down fixture.
2. Make sure unit is level.
3. Using six #10x2-½” screws, secure the Resupply Cabinet into the cabinet blocking through the cleats of the
cabinet as shown in Fig. 3.1. Use three screws along the top and three along the bottom.
4 – INSTALLATION
Fig. 3.1
6 SCREWS AS REQ'D
