7/32" Allen Wrench
Press the arm down to
approximately parallel with the
desk prior to turning the strength
adjustment screw.
Depending on the weight of your
monitor, you may have to make
15-20 turns.
In some instances, further
counterbalance adjustments
are needed to allow the arm’s
instant height adjustment function
to work properly.
If your arm is not staying in
position after performing step 1,
follow these steps:
With arm in raised position,
tighten set screw (A).
With arm in horizontal position,
tighten set screw (B).
Do not over tighten screws.
3/32" Allen Wrench
If the arm drifts downward,
turn the adjustment screw counter-
clockwise.
If the arm drifts upward,
turn the adjustment screw clockwise.
(1)
(2)
How do I counterbalance my arm?
Press the arm down to
approximately parallel with
the desk prior to turning the
strength adjustment screw.
If the arm drifts upward, turn
the adjustment screw clockwise.
If the arm drifts downward, turn
the adjustment screw counter-
clockwise.
Depending on the weight of
your monitor, you may have
to make 15-20 turns.
In some instances, further
counterbalance adjustments
are needed to allow the arm’s
instant height adjustment
function to work properly.
If your arm is not staying in
position after performing
step 1, follow these steps:
With arm in raised position,
tighten set screw (1).
With arm in horizontal position,
tighten set screw (2).
Do not over tighten screws.
_
Ergonomic solutions for office and light industrial work environments
©2016 Ergomart. All rights reserved.
1
2
IMPORTANT!
• Monitor must be on arm
• Arm must be in mount
www.ergomart.com | 888 420 3200
SAA7000 MONITOR ARM
Installation Instructions
PAGE 2 OF 3
