Ergolux ELX-SK03-C01, Instruction Manual

Page: 8 / 10

7
WEIGHING INGREDIENTS
1. Place the scales on a dry, flat and stable surface.
2. To switch the scales on, press the «ON/TARE» button (2), the zero weight indications and the
measurement unit indications will appear on the display (3).
Note: If the indications on the display (3) are not equal to zero, touch the «ON/TARE» button (2), the
indications will be set to zero.
3. Select the weight measurement units touching the button (4) «UNIT», the following symbols will
appear on the display (3):
«g» – weight of product(s) in grams;
«lb:oz» – weight of product(s) in pounds and ounces;
«ml» – water volume in milliliters;
«oz» – weight of product(s) in ounces.
Notes:
– Water volume is measured based on average water density values stored in the scales memory,
that’s why the calculated water volume may differ from the actual value.
– To weight liquid and granular products, place an appropriate container on the platform (1).
4. Put the ingredient(s) on the weighing platform (1). The display (3) will show weight of
ingredient(s) according to selected measurement units.
5. To switch the scale off, remove the ingredients from the platform (1) and touch the button (2)
«ON/TARE» for 3 seconds.
Note: The scales will be switched off automatically in case of nonoperation.
TARE FUNCTION
If you want to measure the weight of several ingredients without removing the previous ones from
the platform (1), proceed as follows:
1. Place the scales on a dry, flat and stable surface.
2. To switch the scales on, press the «ON/TARE» button (2), the zero weight indications and the
measurement unit indications will appear on the display (3).
Note: If the indications on the display (3) are not equal to zero, touch the «ON/TARE» button (2), the
indications will be set to zero.
3. Select the weight measurement units touching the button (4) «UNIT», the following symbols will
appear on the display (3):
«g» – weight of product(s) in grams;
«lb:oz» – weight of product(s) in pounds and ounces;
«ml» – water volume in milliliters;
«oz» – weight of product(s) in ounces.
4. Put the required quantity of the first ingredient on the platform (1), checking the numeral
indication on the display (3).
5. Press the button (2) «ON/TARE», the weight indication on the display (3) will be set to zero.
Note: When weighing ingredients consequently, the tare symbol «TARE» appears on the display (3) as well.
6. Put the required amount of the second ingredient on the platform (1), checking the numeral
indication on the display (3).
7. Repeat steps 4-6 for consequent weighing of the remaining ingredients.
8. Adding ingredients is available until the max. capacity (5 kg) is reached.
9. Remove all the ingredients from the platform, the display (3) will show the symbol «-» and the
total weight of all ingredients.
Note:
– Symbols «EEEE» on the display (3) indicate exceeding of the scale max. capacity of 5 kg, remove
products from the scale immediately to prevent its damage.
– If the scales work improperly, try switching the power off; to do this, open the battery
compartment lid (5) and remove the battery. After a while insert the battery back to its place and
switch the scale on by touching the button (2) «ON/TARE».