ergoline SUN SELECT 1400 Operating Instructions Manual Download Page 46

Page: 46 / 80

Cleaning and maintenance

44/76

7.8.2

Low pressure lamps



Replace faulty UV low pressure lamps immediately. Install replacement
lamps to the outer edges of the tanning area.



Always replace the entire set of lamps after the specified operating time.

–

Turn 90° and carefully remove from the socket.

–

UV low pressure lamps possess a reflector which directs the light out-
wards. The lamps must be mounted in such a way that the rear side of
the reflector is located on the device side.

–

Push the pins vertically into the socket from above.

–

Turn the lamp 90°.
The lettering must be oriented towards the outside (i.e. towards the tan-
ning room or towards the user).

Summary of Contents for SUN SELECT 1400

















































































Search results

Summary of Contents for SUN SELECT 1400

Reviews:

Related manuals for SUN SELECT 1400

Brands by name

Popular brands

ergoline SUN SELECT 1400, Operating Instructions Manual

Search results

Summary of Contents for SUN SELECT 1400

Reviews:

Related manuals for SUN SELECT 1400

Brands by name

Popular brands