Prestige 1600
Planning Manual
6 – Prestige 1600
Prestige 1600
Cabin or studio air is drawn in beneath the front panel (1) of the lower part of the sunbed
and over the filter mats in the canopy (2) (inlet air) in order to cool the equipment.
The inlet air is first cleaned in a filter, then fed past the hot UV low pressure and high
pressure lamps and finally expelled as warm exhaust air via the central exhaust air
bracket (3) at the rear of the sunbed.
Surround air ventilation for the user is provided automatically. The intensity is adjusta-
ble in 9 steps. Cabin or studio air is drawn in and used for cooling.
The air is fed through several nozzles in the middle of the canopy. In the head area
there are two air nozzles that can be switched on separately.
Studio air is also supplied via the air inlet slots beneath the front panel of the sunbed
base and fed to two nozzles at feet level at the lying surface height, thus surrounding
the body with cooling air.
The user can have a pleasant cooling mist (Aqua System) sprayed from the outer noz-
zles in the body area.
The user can preselect the temperature of the air conditioner (Climatronic Plus) provid-
ed as standard equipment, and therefore adjust the temperature of the bed surface and
body air in accordance with his/her wishes.
With the Climatronic Plus with acrylic glass panels at the head and foot end, the desired
temperature is reached even more quickly and stays constant even at extreme room
temperatures due to the closed tanning tunnel.
Equipment cooling
Surround cooling
