8
4.3 Troubleshooting
The benchtop does not move either when pressing the upward or downward button.
1.
Check that the workbench
’
s mains plug is connected to the wall socket, or that the
battery is properly connected to the docking unit.
2.
Make sure that there is mains voltage reaching the wall socket and that no fuse has
been blown, alternatively that the battery has been charged.
3.
Make sure that there is no damage to the cords or to their connections.
If such is the
case, order new units from Ljunggren & daughters or its representative.
The benchtop does not move when I press the upward button.
1.
The benchtop is at its maximum height.
The benchtop does not move when I press the downward button.
1.
The benchtop is at its lowest possible height.
5
Product Specification
Product:
Ljunggren & daughters adjustable-height workbench model Limbo.
Model:
L&D adjustable-height workbench model
Limbo, electrically powered
with:
Lifting column, item no. BL141HA01400A
Control panel, item no. 00-SE
ECU, item no. CB8001T60-0010
L&D adjustable-height workbench model Limbo,
battery powered
with:
Lifting column, item no. BL141HA01400A
Control panel, item no. 00-SE
Docking unit, item no. CBJ2001A001091
Battery charger, item no. CHJ200000A011
Battery (2 pcs), item no. BAJ100000011
Functional Principle of the System:
A mechanical telescopic lifting column with chain drive directly affecting the benchtop.
Operating Conditions:
The workbench must not used for continuous and sustained raising and lowering. Maximum 2
minutes of operation and then at least 18 minutes of downtime.
Maximum Load:
The benchtop may hold a maximum load of 100 kg. This load must not be exceeded.