background image

Check the VESA Pattern of Your TV before You Begin the Installation

IMPORTANT SAFETY INFORMATION

If your TV's VESA Pattern is smaller than 100mm x 100mm / 3.9” x 3.9” or 

greater than 400mm x 400mm / 15.7” x 15.7”, this mount is NOT COMPATIBLE 

with your TV. Please contact our Technical Support at (877) 419-7832 or 

[email protected] to find a compatible mount.

Weight Restrictions

99 lbs/

(44 kg)

MAX

If your TV weighs 

more, do not use 

this product.

W

H

Minimum: 

100mm x 100mm / 3.9” x 3.9” (W x H)

Maximum: 

400mm x 400mm / 15.7” x 15.7” (W x H)

Measure Your TV VESA Pattern:

   

DANGER!

 Please carefully read all instructions before attempting installation. If you do not 

understand the instructions or have any concerns, please contact our Technical Support at 
(877) 419-7832 or Customer Service at [email protected].
   

CAUTION:

 Avoid potential personal injuries and property damage!

• Do not use this product for any purpose that is not explicitly specified in this manual. Do not 

exceed weight capacity. We are not liable for damage or injury caused by improper mounting, 
incorrect assembly or inappropriate use.
• This product is designed for use in wood ceiling joist or solid concrete ceilings. – DO NOT 
install into drywall alone.
• The ceiling must be capable of supporting four times the weight of the TV and mount combined.
• Use this mounting system only for its intended use as described in these instructions. Do not use 
attachments not recommended by the manufacturer.
• Do not use outdoors.
• Route cords and cables properly to avoid mechanical damage.
• SAVE THESE INSTRUCTIONS.

DO NOT exceed the maximum weight indicated. This mounting 
system is intended for use only within the maximum weights 
indicated. Use with products heavier than the maximum 
weights indicated may result in failure of the mount and its 
accessories, causing damage and or injury.

WARNING

02

Summary of Contents for ERMCM1-01





















Reviews: