Ergo LE32CT5515AK, User Manual

Page: 113 / 117

If you’re having problems
There are lines or streaks on the pictures.
-Check if there is any damage to the aerial on the roof, try to change the direction of the aerial to
receive a better signal.
One of the TV's speakers does not work.
-Check the sound balance setting on SOUND MENU.
Note: This page only refer to Video Graphics adaptor (VGA) problems.
Problems and how to fix them
The signal is out of range.
-Change the resolution, horizontal or vertical frequency of your source (PC etc.).
-Check whether the signal cable is connected from the PC to your TV properly.
-Check the signal input source is connected properly.
There is a vertical bar or stripe on my TV screen.
-Turn on the auto configure or change the horizontal or vertical frequency position.
Screen colours aren't appearing as they should be or single colour.
-Check if the video signal cable is connected properly.
-Reinstall your PC video card if the signal source is from your computer.
Maintaining your TV
If you clean your TV carefully and regularly, it helps your TV to last longer. Make sure you turn the
power off and unplug the power cord on your TV before you begin to clean it.
Cleaning the screen
1. Here's a great way to keep the dust off your screen. Wet a soft cloth in a mixture of lukewarm
water and a small amount of fabric softener or washing-up liquid. Wring the cloth until it's almost
dry and then use it to wipe the screen.
2. Make sure there is no excess water on yourTV when you have finished cleaning it.
Cleaning the plastic parts of your TV
Wipe the plastic parts of your TV with a soft, dry, lint-free cloth. Do not use a wet cloth.
If you are going to be away for a while
If you are not going to use yourTV for a while (such as when you go on holiday), you
should unplug the power cord from the socket and disconnect your aerial to protect
yourTV against possible damage from lightning or power surges.