● Any material covering the wall must not exceed 5/8 in. (16 mm)
● Mount
the wall plate
directly onto the concrete surface
● Minimum solid concrete thickness: 203 mm (8 in.)
● Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.)
● Never drill into the mortar between blocks
Step 4
5/16in.(8mm)
Socket Wrench
(Not lncluded)
A1
01
HEAVY!
You may need
assistance with this step.
3B-4
UP
Step 3C Solid Concrete or Concrete Block Option
Install the arm assembly/wall plate [01A]
using lag screws [A1] and washers [A2].
Tighten the lag screws [A1] until the
washers [A2] are pulled firmly against the
arm assembly/wall plate [01A].
WARNING:
●Avoid potential personal injury or property damage! DO NOT over-tighten the lag
screws [A1]. Tighten the lag screws [A1] only until the washers [A2] are pulled firmly
against the wall plate.
●Ensure the
arm assembly/wall plate
[01A] is securely fastened to
the wall before continuing to the next step.
Wall
Anchor
A3
Position the arm assembly/ wall
plate [01A] at your desired
height, level the wall plate and
mark the pilot hole locations.
3C-1
3C-2
ø3/8 in.(10mm)
2 in.(50mm)
Drill 5 pilot holes.Use
the hammer to knock
anchors [A3] into the
wall.
A3
A2
10
Summary of Contents for EI6122
Page 14: ...Step 6 Lock the Arm to Wall Plate Step 7 Manage the Cables 13 ...
Page 15: ......
