Ergo 32DH3004A, User Manual

Page: 73 / 76

73
EN
Problem Possible Solution
Remote control unit
does not operate • Make sure the directions of batteries are inserted correctly
referring to the user guide.
• Batteries could be weak or dead. Replace with new batteries.
• Is a fluorescent light illuminated near the remote control sensor?
• The path of the remote control beam may be blocked. Make
sure the path is clear and that the remote control is aimed at the
remote control sensor on the TV.
• Press the POWER button on the remote control to see if you
can turn on the TV.
• Press MENU button on the remote control to see if there is a
MENU shown on the screen.
• Press only one button at a time and it is the correct one for the
operation you want to perform.
Unit cannot be
operated • External influences such as lightning or static electricity may
cause improper operation. In this case, operate the unit after
first turning on the power of the LED TV and the A VC
• System, or unplug the AC cord for 1 to 2 minutes, then replug
again.
Power is cut off
suddenly • Is the sleep timer set in advance?
• Is there no signal in PC mode or HDMI mode?
• The internal temperature of the unit has increased. Remove any
objects blocking the vent or clean as necessary.
TECHNICAL SPECIFICATIONS
Panel size: 32" (16:9)
Native panel resolution: HD Ready 1366 x 768
Brightness: 180 cd / m2
Contrast ratio: 3000: 1
Refresh panel rate: 60 Hz
VGA x 1, SCART х1, RF (T / C / T2), COAX х1, HDMI х3, USB х
2 , CVBS / AV
(Mini) х1, YPbPr (Mini) х1, AV inputs: 3.5 mm (Headphones) х 1, PC AUDIO IN х1
Broadcast System:
Analog: PAL / SECAM
Digital: DVB-T / DVB-T2 / DVB-C
USB media compatibility:
Video: AVI / MKV / H264/MPEG-4 AVC / MPEG-1 / MPEG-2 / MPEG-4 /
WMV9/VC1 / HEVC (H.265)
Audio: MP3/ AАC/ AC-3
Image: JPEG / BMP / PNG